x1 x2 capacitor.X capacitors are divided into X1, X2, X3, the main differences are:

1. The high voltage resistance of X1 is greater than 2.5 kV and less than or equal to 4 kV. The demand for this kind of capacitor is not too much, and it is expected to become a demand trend in the future

2. X2 withstand high voltage is less than or equal to 2.5 kV

3. X3 withstand high voltage is less than or equal to 1.2 kV

x1 x2 capacitor 822k 275vac

Size of X2-MKT Safety capacitor

X2-MKT Safety capacitor 0.0082μF
W: 13.0mm
H: 11.0mm
T: 5.0mm
D:0.6
P: 10.0mm

Product show

Application

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post x1 x2 capacitor 822k 275vac factory Outlet appeared first on Xuansn Capacitor.

mkt x2 capacitor is a metal polyester film capacitor for suppressing electromagnetic interference of power supply, with excellent flame retardant performance.

mkt x2 capacitor 682k 275vac

Size of X2-MKT Safety capacitor

X2-MKT Safety capacitor 0.0068μF
W: 13.0mm
H: 11.0mm
T: 5.0mm
D:0.6
P: 10.0mm

Product show

Application

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post mkt x2 capacitor 682k 275vac high quality products appeared first on Xuansn Capacitor.

X2 Film Capacitor 332K Is a Metalized Polyester Film Capacitor, packaged in a plastic case, with good size consistency.

X2 Film Capacitor 332K

Size of X2-MKT Safety capacitor

X2-MKT Safety capacitor 0.0033μF
W: 13.0mm
H: 9.0mm
T: 4.0mm
D:0.6
P: 10.0mm

Product show

Application

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post X2 Film Capacitor 332K Chinese manufacturer appeared first on Xuansn Capacitor.

Metallized polyester film capacitors are potted in a plastic case with flame-retardant epoxy resin, and the flame-retardant performance reaches UL94V-0

Metallized polyester film capacitors 272K suppression power supplier

Size of X2-MKT Safety capacitor

X2-MKT Safety capacitor 272K
W: 13.0mm
H: 9.0mm
T: 4.0mm
D:0.6
P: 10.0mm

Product show

Application

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post Metallized polyester film capacitors 272K suppression power supplier sale appeared first on Xuansn Capacitor.

The Anti-jamming X2Mkt polyester film capacitor 0.0022 is a non-inductive structure, which is made of metalized polyester film as the dielectric/electrode, and the lead is made of tin-plated copper-clad steel wire.

Anti-jamming X2MKT polyester film capacitor 222K factory sale

Size of X2-MKT Safety capacitor

X2-MKT Safety capacitor 222K
W: 13.0mm
H: 9.0mm
T: 4.0mm
D:0.6
P: 10.0mm

Product show

Application

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post Anti-jamming X2MKT polyester film capacitor 222K factory sale appeared first on Xuansn Capacitor.