极速赛车168 Solid State Capacitor Archives - Xuansn Capacitor https://capacitorsfilm.com/product-tag/solid-state-capacitor/ Capacitor Supplier Tue, 05 Mar 2024 09:32:22 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.5 极速赛车168 Top-quality Solid State Capacitor 1000UF 4V Leading Suppliers https://capacitorsfilm.com/product/top-quality-solid-state-capacitor-1000uf-4v-leading-suppliers/ Tue, 05 Mar 2024 09:32:22 +0000 https://capacitorsfilm.com/?post_type=product&p=7634 Type: Radial type Operating Temperature:-55℃~+105℃ Life:2000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Top-quality Solid State Capacitor 1000UF 4V Leading Suppliers appeared first on Xuansn Capacitor.

]]> The full name of solid state capacitor 820uf 4v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XE1 Series-Solid State Capacitor 1000UF 4V

●  Super Low ESR, High ripple current
● Load life of 2000hours at 105℃
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification 1000UF4V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08(2.5~7.5V)                tanδ (max.)=0.12(10~25V)             (at 20°C, 120Hz)
Leakage Current I≤0.2CV or 500μA（take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                      (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value

Solid State Capacitor 1000UF 4V—Features

  • High capacity: 1000uF large capacitance to meet the needs of various applications.
  • Low ESR: Low equivalent series resistance ensures high frequency response and efficient power transfer.
  • Long life: Using high-quality materials and precision manufacturing processes, it has long-term stability and reliability.
  • Low Leakage Current: Extremely low leakage current helps reduce system power consumption and improve efficiency.

Solid State Capacitor 1000UF 4V Structure and Working Principle

The structure of a solid electrolytic capacitor usually consists of an electrolyte layer, an aluminum oxide anode layer, and a conductive layer opposite the anode. During operation, ions in the electrolyte layer move between the two plates under the action of the electric field, forming a capacitive effect. This structure and working principle make solid electrolytic capacitors have high capacitance and stability.

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
4 1000 6.3*12 8 800 5500
4 1000 8*9 8 800 5900

Application areas

1000uF 4V solid electrolytic capacitors are widely used in the following fields:

  • Power management system: for stabilization, filtering and energy storage.
  • Communication equipment: such as mobile phones, routers, etc.
  • Automotive electronics: Used for voltage stabilization, energy storage and other functions in automotive circuits.
  • Industrial control system: used for PLC, driver and other equipment.
  • Consumer electronics products: such as televisions, stereos, etc.
  • On-board computer motherboard: Used for power management, voltage stabilization and filtering to improve system performance and reliability.

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

E-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：www.xuanxcapacitors.com

The post Top-quality Solid State Capacitor 1000UF 4V Leading Suppliers appeared first on Xuansn Capacitor.

]]> 极速赛车168 Ensure Stability with Solid State Capacitor 820UF 4V Technology https://capacitorsfilm.com/product/ensure-stability-with-solid-state-capacitor-820uf-4v-technology/ Mon, 04 Mar 2024 09:29:23 +0000 https://capacitorsfilm.com/?post_type=product&p=7628 Type: Radial type Operating Temperature:-55℃~+105℃ Life:2000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Ensure Stability with Solid State Capacitor 820UF 4V Technology appeared first on Xuansn Capacitor.

]]> The full name of solid state capacitor 820uf 4v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XE1 Series-Solid State Capacitor 820UF 4V

●  Super Low ESR, High ripple current
● Load life of 2000hours at 105℃
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification 820UF4V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08(2.5~7.5V)                tanδ (max.)=0.12(10~25V)             (at 20°C, 120Hz)
Leakage Current I≤0.2CV or 500μA（take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                      (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value

Solid State Capacitor 820UF 4V—Features

  • High capacity: 1000uF large capacitance to meet the needs of various applications.
  • Low ESR: Low equivalent series resistance ensures high frequency response and efficient power transfer.
  • Long life: Using high-quality materials and precision manufacturing processes, it has long-term stability and reliability.
  • Low Leakage Current: Extremely low leakage current helps reduce system power consumption and improve efficiency.

Solid State Capacitor 820UF 4V Structure and Working Principle

The structure of a solid electrolytic capacitor usually consists of an electrolyte layer, an aluminum oxide anode layer, and a conductive layer opposite the anode. During operation, ions in the electrolyte layer move between the two plates under the action of the electric field, forming a capacitive effect. This structure and working principle make solid electrolytic capacitors have high capacitance and stability.

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
4 820 6.3*9 8 656 5200
4 820 8*9 8 656 5900

Application areas

820uF 4V solid electrolytic capacitors are widely used in the following fields:

  • Power management system: for stabilization, filtering and energy storage.
  • Communication equipment: such as mobile phones, routers, etc.
  • Automotive electronics: Used for voltage stabilization, energy storage and other functions in automotive circuits.
  • Industrial control system: used for PLC, driver and other equipment.
  • Consumer electronics products: such as televisions, stereos, etc.
  • On-board computer motherboard: Used for power management, voltage stabilization and filtering to improve system performance and reliability.

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

E-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：www.xuanxcapacitors.com

The post Ensure Stability with Solid State Capacitor 820UF 4V Technology appeared first on Xuansn Capacitor.

]]> 极速赛车168 Elevate Your Electronics with Solid State Capacitor 680UF 4V https://capacitorsfilm.com/product/elevate-your-electronics-with-solid-state-capacitor-680uf-4v/ Mon, 04 Mar 2024 09:17:30 +0000 https://capacitorsfilm.com/?post_type=product&p=7626 Type: Radial type Operating Temperature:-55℃~+105℃ Life:2000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Elevate Your Electronics with Solid State Capacitor 680UF 4V appeared first on Xuansn Capacitor.

]]> The full name of solid state capacitor 680uf 4v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XE1 Series-Solid State Capacitor 680UF 4V

●  Super Low ESR, High ripple current
● Load life of 2000hours at 105℃
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification 680UF4V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08(2.5~7.5V)                tanδ (max.)=0.12(10~25V)             (at 20°C, 120Hz)
Leakage Current I≤0.2CV or 500μA（take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                      (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value

Solid State Capacitor 680UF 4V—Features

  • High capacity: 1000uF large capacitance to meet the needs of various applications.
  • Low ESR: Low equivalent series resistance ensures high frequency response and efficient power transfer.
  • Long life: Using high-quality materials and precision manufacturing processes, it has long-term stability and reliability.
  • Low Leakage Current: Extremely low leakage current helps reduce system power consumption and improve efficiency.

Solid State Capacitor 680UF 4V Structure and Working Principle

The structure of a solid electrolytic capacitor usually consists of an electrolyte layer, an aluminum oxide anode layer, and a conductive layer opposite the anode. During operation, ions in the electrolyte layer move between the two plates under the action of the electric field, forming a capacitive effect. This structure and working principle make solid electrolytic capacitors have high capacitance and stability.

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
4 680 6.3*8 8 544 5100
4 680 8*9 8 544 5900

Application areas

680uF 4V solid electrolytic capacitors are widely used in the following fields:

  • Power management system: for stabilization, filtering and energy storage.
  • Communication equipment: such as mobile phones, routers, etc.
  • Automotive electronics: Used for voltage stabilization, energy storage and other functions in automotive circuits.
  • Industrial control system: used for PLC, driver and other equipment.
  • Consumer electronics products: such as televisions, stereos, etc.
  • On-board computer motherboard: Used for power management, voltage stabilization and filtering to improve system performance and reliability.

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

E-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：www.xuanxcapacitors.com

The post Elevate Your Electronics with Solid State Capacitor 680UF 4V appeared first on Xuansn Capacitor.

]]> 极速赛车168 Solid State Capacitor 560UF 4V Enhance Your Productivity https://capacitorsfilm.com/product/solid-state-capacitor-560uf-4v-enhance-your-productivity/ Mon, 04 Mar 2024 09:04:34 +0000 https://capacitorsfilm.com/?post_type=product&p=7624 Type: Radial type Operating Temperature:-55℃~+105℃ Life:2000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Solid State Capacitor 560UF 4V Enhance Your Productivity appeared first on Xuansn Capacitor.

]]> The full name of solid state capacitor 560uf 4v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XE1 Series-Solid State Capacitor 560UF 4V

●  Super Low ESR, High ripple current
● Load life of 2000hours at 105℃
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification 560UF4V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08(2.5~7.5V)                tanδ (max.)=0.12(10~25V)             (at 20°C, 120Hz)
Leakage Current I≤0.2CV or 500μA（take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                      (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value

Solid State Capacitor 560UF 4V—Features

  • High capacity: 1000uF large capacitance to meet the needs of various applications.
  • Low ESR: Low equivalent series resistance ensures high frequency response and efficient power transfer.
  • Long life: Using high-quality materials and precision manufacturing processes, it has long-term stability and reliability.
  • Low Leakage Current: Extremely low leakage current helps reduce system power consumption and improve efficiency.

Solid State Capacitor 560UF 4V Structure and Working Principle

The structure of a solid electrolytic capacitor usually consists of an electrolyte layer, an aluminum oxide anode layer, and a conductive layer opposite the anode. During operation, ions in the electrolyte layer move between the two plates under the action of the electric field, forming a capacitive effect. This structure and working principle make solid electrolytic capacitors have high capacitance and stability.

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
4 560 6.3*8 8 500 5100
4 560 8*9 8 500 5900

Application areas

560uF 4V solid electrolytic capacitors are widely used in the following fields:

  • Power management system: for stabilization, filtering and energy storage.
  • Communication equipment: such as mobile phones, routers, etc.
  • Automotive electronics: Used for voltage stabilization, energy storage and other functions in automotive circuits.
  • Industrial control system: used for PLC, driver and other equipment.
  • Consumer electronics products: such as televisions, stereos, etc.
  • On-board computer motherboard: Used for power management, voltage stabilization and filtering to improve system performance and reliability.

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

E-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：www.xuanxcapacitors.com

The post Solid State Capacitor 560UF 4V Enhance Your Productivity appeared first on Xuansn Capacitor.

]]> 极速赛车168 Improve Circuit Efficiency with Solid State Capacitor 1500UF 2.5V https://capacitorsfilm.com/product/improve-circuit-efficiency-with-solid-state-capacitor-1500uf-2-5v/ Mon, 04 Mar 2024 08:04:50 +0000 https://capacitorsfilm.com/?post_type=product&p=7620 Type: Radial type Operating Temperature:-55℃~+105℃ Life:2000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Improve Circuit Efficiency with Solid State Capacitor 1500UF 2.5V appeared first on Xuansn Capacitor.

]]> The full name of solid state capacitor 1500uf 2.5v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XE1 Series-Solid State Capacitor 1500UF 2.5V

●  Super Low ESR, High ripple current
● Load life of 2000hours at 105℃
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification 1500UF2.5V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08(2.5~7.5V)                tanδ (max.)=0.12(10~25V)             (at 20°C, 120Hz)
Leakage Current I≤0.2CV or 500μA（take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                      (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value

Solid State Capacitor 1500UF 2.5V—Features

  • High capacity: 1500uF large capacitance to meet the needs of various applications.
  • Low ESR: Low equivalent series resistance ensures high frequency response and efficient power transfer.
  • Long life: Using high-quality materials and precision manufacturing processes, it has long-term stability and reliability.
  • Low Leakage Current: Extremely low leakage current helps reduce system power consumption and improve efficiency.

Solid State Capacitor 1500UF 2.5V Structure and Working Principle

The structure of a solid electrolytic capacitor usually consists of an electrolyte layer, an aluminum oxide anode layer, and a conductive layer opposite the anode. During operation, ions in the electrolyte layer move between the two plates under the action of the electric field, forming a capacitive effect. This structure and working principle make solid electrolytic capacitors have high capacitance and stability.

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
2.5 1000 8*9 8 500 5900
2.5 1000 8*12 8 500 6100

Application areas

1500uF 2.5V solid electrolytic capacitors are widely used in the following fields:

  • Power management system: for stabilization, filtering and energy storage.
  • Communication equipment: such as mobile phones, routers, etc.
  • Automotive electronics: Used for voltage stabilization, energy storage and other functions in automotive circuits.
  • Industrial control system: used for PLC, driver and other equipment.
  • Consumer electronics products: such as televisions, stereos, etc.
  • On-board computer motherboard: Used for power management, voltage stabilization and filtering to improve system performance and reliability.

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

E-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：www.xuanxcapacitors.com

The post Improve Circuit Efficiency with Solid State Capacitor 1500UF 2.5V appeared first on Xuansn Capacitor.

]]> 极速赛车168 Enhanced Electronics Stability with Solid State Capacitor 1000UF 2.5V https://capacitorsfilm.com/product/enhanced-electronics-stability-with-solid-state-capacitor-1000uf-2-5v/ Mon, 04 Mar 2024 06:59:21 +0000 https://capacitorsfilm.com/?post_type=product&p=7616 Type: Radial type Operating Temperature:-55℃~+105℃ Life:2000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Enhanced Electronics Stability with Solid State Capacitor 1000UF 2.5V appeared first on Xuansn Capacitor.

]]> The full name of solid state capacitor 1000uf 2.5v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XE1 Series-Solid State Capacitor 1000UF 2.5V

●  Super Low ESR, High ripple current
● Load life of 2000hours at 105℃
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification 1000UF2.5V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08(2.5~7.5V)                tanδ (max.)=0.12(10~25V)             (at 20°C, 120Hz)
Leakage Current I≤0.2CV or 500μA（take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                      (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value

Solid State Capacitor 1000UF 2.5V—Features

  • High capacity: 1000uF large capacitance to meet the needs of various applications.
  • Low ESR: Low equivalent series resistance ensures high frequency response and efficient power transfer.
  • Long life: Using high-quality materials and precision manufacturing processes, it has long-term stability and reliability.
  • Low Leakage Current: Extremely low leakage current helps reduce system power consumption and improve efficiency.

Solid State Capacitor 1000UF 2.5V Structure and Working Principle

The structure of a solid electrolytic capacitor usually consists of an electrolyte layer, an aluminum oxide anode layer, and a conductive layer opposite the anode. During operation, ions in the electrolyte layer move between the two plates under the action of the electric field, forming a capacitive effect. This structure and working principle make solid electrolytic capacitors have high capacitance and stability.

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
2.5 1000 8*9 8 500 5900
2.5 1000 8*12 8 500 6100

Application areas

1000uF 2.5V solid electrolytic capacitors are widely used in the following fields:

  • Power management system: for stabilization, filtering and energy storage.
  • Communication equipment: such as mobile phones, routers, etc.
  • Automotive electronics: Used for voltage stabilization, energy storage and other functions in automotive circuits.
  • Industrial control system: used for PLC, driver and other equipment.
  • Consumer electronics products: such as televisions, stereos, etc.
  • On-board computer motherboard: Used for power management, voltage stabilization and filtering to improve system performance and reliability.

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

E-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：www.xuanxcapacitors.com

The post Enhanced Electronics Stability with Solid State Capacitor 1000UF 2.5V appeared first on Xuansn Capacitor.

]]> 极速赛车168 Power Your Devices with Solid State Capacitors 680UF 2.5V https://capacitorsfilm.com/product/power-your-devices-with-solid-state-capacitors-680uf-2-5v/ Mon, 04 Mar 2024 06:35:46 +0000 https://capacitorsfilm.com/?post_type=product&p=7612 Type: Radial type Operating Temperature:-55℃~+105℃ Life:2000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Power Your Devices with Solid State Capacitors 680UF 2.5V appeared first on Xuansn Capacitor.

]]> The full name of solid state capacitor 680uf 2.5v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XE1 Series-Solid State Capacitor 680UF 2.5V

●  Super Low ESR, High ripple current
● Load life of 2000hours at 105℃
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification 680UF2.5V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08(2.5~7.5V)                tanδ (max.)=0.12(10~25V)             (at 20°C, 120Hz)
Leakage Current I≤0.2CV or 500μA（take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                      (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value

Solid State Capacitor 680UF 2.5V—Features

  • High capacity: 1000uF large capacitance to meet the needs of various applications.
  • Low ESR: Low equivalent series resistance ensures high frequency response and efficient power transfer.
  • Long life: Using high-quality materials and precision manufacturing processes, it has long-term stability and reliability.
  • Low Leakage Current: Extremely low leakage current helps reduce system power consumption and improve efficiency.

Solid State Capacitor 680UF 2.5V Structure and Working Principle

The structure of a solid electrolytic capacitor usually consists of an electrolyte layer, an aluminum oxide anode layer, and a conductive layer opposite the anode. During operation, ions in the electrolyte layer move between the two plates under the action of the electric field, forming a capacitive effect. This structure and working principle make solid electrolytic capacitors have high capacitance and stability.

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
2.5 680 6.3*8 8 500 5100
2.5 680 8*9 8 500 5900

Application areas

680uF 2.5V solid electrolytic capacitors are widely used in the following fields:

  • Power management system: for stabilization, filtering and energy storage.
  • Communication equipment: such as mobile phones, routers, etc.
  • Automotive electronics: Used for voltage stabilization, energy storage and other functions in automotive circuits.
  • Industrial control system: used for PLC, driver and other equipment.
  • Consumer electronics products: such as televisions, stereos, etc.
  • On-board computer motherboard: Used for power management, voltage stabilization and filtering to improve system performance and reliability.

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

E-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：www.xuanxcapacitors.com

The post Power Your Devices with Solid State Capacitors 680UF 2.5V appeared first on Xuansn Capacitor.

]]> 极速赛车168 Advanced Solid State Capacitors 560UF 2.5V for Reliable Circuitry https://capacitorsfilm.com/product/advanced-solid-state-capacitors-560uf-2-5v-for-reliable-circuitry/ Mon, 04 Mar 2024 03:55:33 +0000 https://capacitorsfilm.com/?post_type=product&p=7609 Type: Radial type Operating Temperature:-55℃~+105℃ Life:2000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Advanced Solid State Capacitors 560UF 2.5V for Reliable Circuitry appeared first on Xuansn Capacitor.

]]> The full name of solid state capacitor 560uf 2.5v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XE1 Series-Solid State Capacitor 560UF 2.5V

●  Super Low ESR, High ripple current
● Load life of 2000hours at 105℃
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification 560UF2.5V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08(2.5~7.5V)                tanδ (max.)=0.12(10~25V)             (at 20°C, 120Hz)
Leakage Current I≤0.2CV or 500μA（take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                      (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value

Solid State Capacitor 560UF 2.5V—Features

  • High capacity: 1000uF large capacitance to meet the needs of various applications.
  • Low ESR: Low equivalent series resistance ensures high frequency response and efficient power transfer.
  • Long life: Using high-quality materials and precision manufacturing processes, it has long-term stability and reliability.
  • Low Leakage Current: Extremely low leakage current helps reduce system power consumption and improve efficiency.

Solid State Capacitor 560UF 2.5V Structure and Working Principle

The structure of a solid electrolytic capacitor usually consists of an electrolyte layer, an aluminum oxide anode layer, and a conductive layer opposite the anode. During operation, ions in the electrolyte layer move between the two plates under the action of the electric field, forming a capacitive effect. This structure and working principle make solid electrolytic capacitors have high capacitance and stability.

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
2.5 560 5*8 12 500 4100
2.5 560 6.3*8 8 500 5100

Application areas

560uF 2.5V solid electrolytic capacitors are widely used in the following fields:

  • Power management system: for stabilization, filtering and energy storage.
  • Communication equipment: such as mobile phones, routers, etc.
  • Automotive electronics: Used for voltage stabilization, energy storage and other functions in automotive circuits.
  • Industrial control system: used for PLC, driver and other equipment.
  • Consumer electronics products: such as televisions, stereos, etc.
  • On-board computer motherboard: Used for power management, voltage stabilization and filtering to improve system performance and reliability.

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

E-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：www.xuanxcapacitors.com

The post Advanced Solid State Capacitors 560UF 2.5V for Reliable Circuitry appeared first on Xuansn Capacitor.

]]>