极速赛车168 XM1(Super low ESR,high ripple current） Archives - Xuansn Capacitor https://capacitorsfilm.com/product-category/capacitor/solid-capacitor/xm1super-low-esrhigh-ripple-current）/ Capacitor Supplier Sat, 12 Nov 2022 09:53:47 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.5 极速赛车168 Capacitor 680uf 2.5v SMD type manufacturing vendor https://capacitorsfilm.com/product/capacitor-680uf-2-5v-smd-type-manufacturing-vendor/ Sat, 12 Nov 2022 09:53:46 +0000 https://capacitorsfilm.com/?post_type=product&p=6498 Type: SMD Operating Temperature:-55℃~+105℃ Life:5000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Capacitor 680uf 2.5v SMD type manufacturing vendor appeared first on Xuansn Capacitor.

]]> The full name of solid capacitor 680uf 2.5v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XM1 Series-Capacitor 680uf 2.5v

●Super low ESR, High ripple, miniaturized
● SMD type: lead free reflow soldering condition at 260℃ peak correspondence
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification 680UF2.5V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08                                       (at 20°C, 120Hz)
Leakage Current I≤0.2 CV or 500μA（Take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                       (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±10% of the initial value
D.F. (tanδ):≤130% of the initial specified value
ESR:≤130% of the initial specified value
Leakage Current :≤The initial specified value

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
2.5 680 8*12.6 12 500 5100

How to order

XM1    681    M     0E     D06L09     T

XM1:Series code

681:Capacitance code

M:Capacitance tolerance code

0E:Voltage code

D06L09:Size code

T:Packing number

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

e-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：xuanxcapacitors.com

The post Capacitor 680uf 2.5v SMD type manufacturing vendor appeared first on Xuansn Capacitor.

]]> 极速赛车168 Capacitor 820uf 2.5v SMD type manufacturing vendor https://capacitorsfilm.com/product/capacitor-820uf-2-5v-smd-type-manufacturing-vendor/ Sat, 12 Nov 2022 09:52:16 +0000 https://capacitorsfilm.com/?post_type=product&p=6499 Type: SMD Operating Temperature:-55℃~+105℃ Life:5000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Capacitor 820uf 2.5v SMD type manufacturing vendor appeared first on Xuansn Capacitor.

]]> The full name of solid capacitor 820uf 2.5v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XM1 Series-Capacitor 820uf 2.5v

●Super low ESR, High ripple, miniaturized
● SMD type: lead free reflow soldering condition at 260℃ peak correspondence
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification 820UF2.5V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08                                       (at 20°C, 120Hz)
Leakage Current I≤0.2 CV or 500μA（Take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                       (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±10% of the initial value
D.F. (tanδ):≤130% of the initial specified value
ESR:≤130% of the initial specified value
Leakage Current :≤The initial specified value

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
2.5 820 8*12.6 12 500 5100

How to order

XM1    821    M     0E     D08L13    T

XM1:Series code

821:Capacitance code

M:Capacitance tolerance code

0E:Voltage code

D08L13:Size code

T:Packing number

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

e-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：xuanxcapacitors.com

The post Capacitor 820uf 2.5v SMD type manufacturing vendor appeared first on Xuansn Capacitor.

]]> 极速赛车168 Capacitor 560uf 4v SMD type supplier https://capacitorsfilm.com/product/capacitor-560uf-4v-smd-type-supplier/ Sat, 12 Nov 2022 09:49:48 +0000 https://capacitorsfilm.com/?post_type=product&p=6500 Type: SMD Operating Temperature:-55℃~+105℃ Life:5000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Capacitor 560uf 4v SMD type supplier appeared first on Xuansn Capacitor.

]]> The full name of solid capacitor 560uf 4v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XM1 Series-Capacitor 560uf 4v

●Super low ESR, High ripple, miniaturized
● SMD type: lead free reflow soldering condition at 260℃ peak correspondence
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification 560UF4V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08                                       (at 20°C, 120Hz)
Leakage Current I≤0.2 CV or 500μA（Take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                       (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±10% of the initial value
D.F. (tanδ):≤130% of the initial specified value
ESR:≤130% of the initial specified value
Leakage Current :≤The initial specified value

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
4 560 8*9.8 15 500 4500

How to order

XM1    561    M    0G     D08L10    T

XM1:Series code

561:Capacitance code

M:Capacitance tolerance code

0G:Voltage code

D08L10:Size code

T:Packing number

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

e-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：xuanxcapacitors.com

The post Capacitor 560uf 4v SMD type supplier appeared first on Xuansn Capacitor.

]]> 极速赛车168 Capacitor 680uf 4v SMD type manufacturing vendor https://capacitorsfilm.com/product/capacitor-680uf-4v-smd-type-manufacturing-vendor/ Sat, 12 Nov 2022 09:44:23 +0000 https://capacitorsfilm.com/?post_type=product&p=6501 Type: SMD Operating Temperature:-55℃~+105℃ Life:5000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Capacitor 680uf 4v SMD type manufacturing vendor appeared first on Xuansn Capacitor.

]]> The full name of solid capacitor 680uf 4v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XM1 Series-Capacitor 680uf 4v

●Super low ESR, High ripple, miniaturized
● SMD type: lead free reflow soldering condition at 260℃ peak correspondence
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification 680UF4V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08                                       (at 20°C, 120Hz)
Leakage Current I≤0.2 CV or 500μA（Take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                       (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±10% of the initial value
D.F. (tanδ):≤130% of the initial specified value
ESR:≤130% of the initial specified value
Leakage Current :≤The initial specified value

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
4 680 8*12.6 12 544 4700

How to order

XM1    681    M    0G     D08L13    T

XM1:Series code

681:Capacitance code

M:Capacitance tolerance code

0G:Voltage code

D08L13:Size code

T:Packing number

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

e-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：xuanxcapacitors.com

The post Capacitor 680uf 4v SMD type manufacturing vendor appeared first on Xuansn Capacitor.

]]> 极速赛车168 Capacitor 820uf 4v SMD type manufacturing vendor https://capacitorsfilm.com/product/capacitor-820uf-4v-smd-type-manufacturing-vendor/ Sat, 12 Nov 2022 09:41:21 +0000 https://capacitorsfilm.com/?post_type=product&p=6502 Type: SMD Operating Temperature:-55℃~+105℃ Life:5000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Capacitor 820uf 4v SMD type manufacturing vendor appeared first on Xuansn Capacitor.

]]> The full name of solid capacitor 820uf 4v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XM2 Series-Capacitor 820uf 4v

●Super low ESR, High ripple, miniaturized
● SMD type: lead free reflow soldering condition at 260℃ peak correspondence
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification 820UF4V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08                                       (at 20°C, 120Hz)
Leakage Current I≤0.2 CV or 500μA（Take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                       (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±10% of the initial value
D.F. (tanδ):≤130% of the initial specified value
ESR:≤130% of the initial specified value
Leakage Current :≤The initial specified value

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
4 820 10*12.6 12 656 5500

How to order

XM2    821    M    0G     D10L13    T

XM2:Series code

821:Capacitance code

M:Capacitance tolerance code

0G:Voltage code

D10L13:Size code

T:Packing number

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

e-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：xuanxcapacitors.com

The post Capacitor 820uf 4v SMD type manufacturing vendor appeared first on Xuansn Capacitor.

]]> 极速赛车168 Capacitor 1000uf 4v SMD type supplier https://capacitorsfilm.com/product/capacitor-1000uf-4v-smd-type-supplier/ Sat, 12 Nov 2022 09:28:19 +0000 https://capacitorsfilm.com/?post_type=product&p=6486 Type: SMD Operating Temperature:-55℃~+105℃ Life:5000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Capacitor 1000uf 4v SMD type supplier appeared first on Xuansn Capacitor.

]]> The full name of solid capacitor 1000uf 4v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XM1 Series-Capacitor 1000uf 4v

●Super low ESR, High ripple, miniaturized
● SMD type: lead free reflow soldering condition at 260℃ peak correspondence
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification 1000UF4V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08                                       (at 20°C, 120Hz)
Leakage Current I≤0.2 CV or 500μA（Take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                       (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±10% of the initial value
D.F. (tanδ):≤130% of the initial specified value
ESR:≤130% of the initial specified value
Leakage Current :≤The initial specified value

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
4 1000 10*12.6 10 800 5500

How to order

XM1   102   M    0G     D08L13    T

XM1:Series code

102:Capacitance code

M:Capacitance tolerance code

0G:Voltage code

D10L13:Size code

T:Packing number

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

e-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：xuanxcapacitors.com

The post Capacitor 1000uf 4v SMD type supplier appeared first on Xuansn Capacitor.

]]> 极速赛车168 Capacitor 1200uf 4v SMD type manufacturing vendor https://capacitorsfilm.com/product/capacitor-1200uf-4v-smd-type-manufacturing-vendor/ Sat, 12 Nov 2022 09:21:52 +0000 https://capacitorsfilm.com/?post_type=product&p=6487 Type: SMD Operating Temperature:-55℃~+105℃ Life:5000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Capacitor 1200uf 4v SMD type manufacturing vendor appeared first on Xuansn Capacitor.

]]> The full name of solid capacitor 1200uf 4v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XM1 Series-Capacitor 1200uf 4v

●Super low ESR, High ripple, miniaturized
● SMD type: lead free reflow soldering condition at 260℃ peak correspondence
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification 1200UF4V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08                                       (at 20°C, 120Hz)
Leakage Current I≤0.2 CV or 500μA（Take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                       (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±10% of the initial value
D.F. (tanδ):≤130% of the initial specified value
ESR:≤130% of the initial specified value
Leakage Current :≤The initial specified value

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
4 1200 10*12.6 12 960 5500

How to order

XM1    122    M    0G     D08L13    T

XM1:Series code

122:Capacitance code

M:Capacitance tolerance code

0G:Voltage code

D10L13:Size code

T:Packing number

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

e-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：xuanxcapacitors.com

The post Capacitor 1200uf 4v SMD type manufacturing vendor appeared first on Xuansn Capacitor.

]]> 极速赛车168 Capacitor 220uf 6.3v SMD type high ripple current supplier https://capacitorsfilm.com/product/capacitor-220uf-6-3v-smd-type-high-ripple-current-supplier/ Sat, 12 Nov 2022 09:18:59 +0000 https://capacitorsfilm.com/?post_type=product&p=6488 Type: SMD Operating Temperature:-55℃~+105℃ Life:5000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Capacitor 220uf 6.3v SMD type high ripple current supplier appeared first on Xuansn Capacitor.

]]> The full name of solid capacitor 220uf 6.3v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XM1 Series-Capacitor 220uf 6.3v

●Super low ESR, High ripple, miniaturized
● SMD type: lead free reflow soldering condition at 260℃ peak correspondence
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification 220UF6.3V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08                                       (at 20°C, 120Hz)
Leakage Current I≤0.2 CV or 500μA（Take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                       (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±10% of the initial value
D.F. (tanδ):≤130% of the initial specified value
ESR:≤130% of the initial specified value
Leakage Current :≤The initial specified value

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
6.3 220 6.3*9 18 500 3900

How to order

XM1    221    M    0J     D06L09    T

XM1:Series code

221:Capacitance code

M:Capacitance tolerance code

0J:Voltage code

D06L09:Size code

T:Packing number

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

e-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：xuanxcapacitors.com

The post Capacitor 220uf 6.3v SMD type high ripple current supplier appeared first on Xuansn Capacitor.

]]> 极速赛车168 Capacitor 270uf 6.3v SMD type supplier https://capacitorsfilm.com/product/capacitor-270uf-6-3v-smd-type-supplier/ Sat, 12 Nov 2022 09:14:13 +0000 https://capacitorsfilm.com/?post_type=product&p=6489 Type: SMD Operating Temperature:-55℃~+105℃ Life:5000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Capacitor 270uf 6.3v SMD type supplier appeared first on Xuansn Capacitor.

]]> The full name of solid capacitor 270uf 6.3v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XM1 Series-Capacitor 270uf 6.3v

●Super low ESR, High ripple, miniaturized
● SMD type: lead free reflow soldering condition at 260℃ peak correspondence
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification 270UF6.3V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08                                       (at 20°C, 120Hz)
Leakage Current I≤0.2 CV or 500μA（Take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                       (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±10% of the initial value
D.F. (tanδ):≤130% of the initial specified value
ESR:≤130% of the initial specified value
Leakage Current :≤The initial specified value

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
6.3 270 6.3*9 18 500 4100

How to order

XM2    271    M    0J     D06L09    T

XM2:Series code

271:Capacitance code

M:Capacitance tolerance code

0J:Voltage code

D06L09:Size code

T:Packing number

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

e-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：xuanxcapacitors.com

The post Capacitor 270uf 6.3v SMD type supplier appeared first on Xuansn Capacitor.

]]> 极速赛车168 Capacitor 330uf 6.3v SMD type manufacturer https://capacitorsfilm.com/product/capacitor-330uf-6-3v-smd-type-manufacturer/ Sat, 12 Nov 2022 09:09:48 +0000 https://capacitorsfilm.com/?post_type=product&p=6490 Type: SMD Operating Temperature:-55℃~+105℃ Life:5000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Capacitor 330uf 6.3v SMD type manufacturer appeared first on Xuansn Capacitor.

]]> The full name of solid capacitor 330uf 6.3v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XM1 Series-Capacitor 330uf 6.3v

●Super low ESR, High ripple, miniaturized
● SMD type: lead free reflow soldering condition at 260℃ peak correspondence
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification33 330UF6.3V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08                                       (at 20°C, 120Hz)
Leakage Current I≤0.2 CV or 500μA（Take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                       (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±10% of the initial value
D.F. (tanδ):≤130% of the initial specified value
ESR:≤130% of the initial specified value
Leakage Current :≤The initial specified value

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
6.3 330 6.3*9 18 500 4100

How to order

XM1   331    M    0J     D06L09    T

XM1:Series code

331:Capacitance code

M:Capacitance tolerance code

0J:Voltage code

D06L09:Size code

T:Packing number

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

e-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：xuanxcapacitors.com

The post Capacitor 330uf 6.3v SMD type manufacturer appeared first on Xuansn Capacitor.

]]>