极速赛车168 XM2(Low ESR,high ripple current） Archives - Xuansn Capacitor https://capacitorsfilm.com/product-category/capacitor/solid-capacitor/xm2low-esrhigh-ripple-current）/ Capacitor Supplier Thu, 17 Nov 2022 09:16:07 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.5 极速赛车168 Capacitor 47uf 63v SMD type manufacturing vendor https://capacitorsfilm.com/product/capacitor-47uf-63v-smd-type-manufacturing-vendor/ Thu, 17 Nov 2022 09:15:22 +0000 https://capacitorsfilm.com/?post_type=product&p=6548 Type: SMD Operating Temperature:-55℃~+105℃ Life:5000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Capacitor 47uf 63v SMD type manufacturing vendor appeared first on Xuansn Capacitor.

]]> The full name of solid capacitor 47uf 63v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XM2 Series-Capacitor 47uf 63v

● Low ESR, High ripple, miniaturized
● SMD type: lead free reflow soldering condition at 260℃ peak correspondence
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification33 47UF63V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08(2.5~6.3V)        tanδ (max.)=0.12(10~100V)                               (at 20°C, 120Hz)
Leakage Current I≤0.2 CV or 500μA（2.5~25V,take the maximum）I≤0.1 CV or 500μA（35~100V,take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                       (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±10% of the initial value
D.F. (tanδ):≤130% of the initial specified value
ESR:≤130% of the initial specified value
Leakage Current :≤The initial specified value

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
63 47 8*9.8 60 299 1100
63 47 8*12.6 60 299 1300

How to order

XM2   470   M    1J   D08L10    T

XM2:Series code

470:Capacitance code

M:Capacitance tolerance code

1J:Voltage code

D08L10:Size code

T:Packing number

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

e-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：xuanxcapacitors.com

 

The post Capacitor 47uf 63v SMD type manufacturing vendor appeared first on Xuansn Capacitor.

]]> 极速赛车168 Capacitor 33uf 63v SMD type vendor https://capacitorsfilm.com/product/capacitor-33uf-63v-smd-type-vendor/ Thu, 17 Nov 2022 09:13:49 +0000 https://capacitorsfilm.com/?post_type=product&p=6549 Type: SMD Operating Temperature:-55℃~+105℃ Life:5000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Capacitor 33uf 63v SMD type vendor appeared first on Xuansn Capacitor.

]]> The full name of solid capacitor 33uf 63v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XM2 Series-Capacitor 33uf 63v

● Low ESR, High ripple, miniaturized
● SMD type: lead free reflow soldering condition at 260℃ peak correspondence
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification33 33UF63V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08(2.5~6.3V)        tanδ (max.)=0.12(10~100V)                               (at 20°C, 120Hz)
Leakage Current I≤0.2 CV or 500μA（2.5~25V,take the maximum）I≤0.1 CV or 500μA（35~100V,take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                       (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±10% of the initial value
D.F. (tanδ):≤130% of the initial specified value
ESR:≤130% of the initial specified value
Leakage Current :≤The initial specified value

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
63 33 6.3*9 100 299 820
63 33 8*9.8 60 299 1100

How to order

XM2   330   M    1J   D06L09    T

XM2:Series code

330:Capacitance code

M:Capacitance tolerance code

1J:Voltage code

D06L09:Size code

T:Packing number

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

e-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：xuanxcapacitors.com

 

The post Capacitor 33uf 63v SMD type vendor appeared first on Xuansn Capacitor.

]]> 极速赛车168 Capacitor 22uf 63v SMD type high ripple supplier https://capacitorsfilm.com/product/capacitor-22uf-63v-smd-type-high-ripple-supplier/ Thu, 17 Nov 2022 09:13:00 +0000 https://capacitorsfilm.com/?post_type=product&p=6550 Type: SMD Operating Temperature:-55℃~+105℃ Life:5000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Capacitor 22uf 63v SMD type high ripple supplier appeared first on Xuansn Capacitor.

]]> The full name of solid capacitor 22uf 63v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XM2 Series-Capacitor 22uf 63v

● Low ESR, High ripple, miniaturized
● SMD type: lead free reflow soldering condition at 260℃ peak correspondence
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification33 22UF63V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08(2.5~6.3V)        tanδ (max.)=0.12(10~100V)                               (at 20°C, 120Hz)
Leakage Current I≤0.2 CV or 500μA（2.5~25V,take the maximum）I≤0.1 CV or 500μA（35~100V,take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                       (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±10% of the initial value
D.F. (tanδ):≤130% of the initial specified value
ESR:≤130% of the initial specified value
Leakage Current :≤The initial specified value

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
63 22 6.3*9 110 299 750

How to order

XM2   220   M    1J   D06L09    T

XM2:Series code

220:Capacitance code

M:Capacitance tolerance code

1J:Voltage code

D06L09:Size code

T:Packing number

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

e-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：xuanxcapacitors.com

 

The post Capacitor 22uf 63v SMD type high ripple supplier appeared first on Xuansn Capacitor.

]]> 极速赛车168 Capacitor 220uf 50v SMD type high ripple supplier https://capacitorsfilm.com/product/capacitor-220uf-50v-smd-type-high-ripple-supplier/ Thu, 17 Nov 2022 09:09:19 +0000 https://capacitorsfilm.com/?post_type=product&p=6551 Type: SMD Operating Temperature:-55℃~+105℃ Life:5000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Capacitor 220uf 50v SMD type high ripple supplier appeared first on Xuansn Capacitor.

]]> The full name of solid capacitor 220uf 50v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XM2 Series-Capacitor 220uf 50v

● Low ESR, High ripple, miniaturized
● SMD type: lead free reflow soldering condition at 260℃ peak correspondence
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification33 220UF50V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08(2.5~6.3V)        tanδ (max.)=0.12(10~100V)                               (at 20°C, 120Hz)
Leakage Current I≤0.2 CV or 500μA（2.5~25V,take the maximum）I≤0.1 CV or 500μA（35~100V,take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                       (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±10% of the initial value
D.F. (tanδ):≤130% of the initial specified value
ESR:≤130% of the initial specified value
Leakage Current :≤The initial specified value

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
50 220 10*12.6 55 1100 2100

How to order

XM2   221  M    1H    D10L13   T

XM2:Series code

221:Capacitance code

M:Capacitance tolerance code

1H:Voltage code

D10L13:Size code

T:Packing number

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

e-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：xuanxcapacitors.com

 

The post Capacitor 220uf 50v SMD type high ripple supplier appeared first on Xuansn Capacitor.

]]> 极速赛车168 Capacitor 10uf 63v SMD type high ripple vendor https://capacitorsfilm.com/product/capacitor-10uf-63v-smd-type-high-ripple-vendor/ Thu, 17 Nov 2022 09:07:20 +0000 https://capacitorsfilm.com/?post_type=product&p=6552 Type: SMD Operating Temperature:-55℃~+105℃ Life:5000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Capacitor 10uf 63v SMD type high ripple vendor appeared first on Xuansn Capacitor.

]]> The full name of solid capacitor 10uf 63v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XM2 Series-Capacitor 10uf 63v

● Low ESR, High ripple, miniaturized
● SMD type: lead free reflow soldering condition at 260℃ peak correspondence
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification33 10UF63V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08(2.5~6.3V)        tanδ (max.)=0.12(10~100V)                               (at 20°C, 120Hz)
Leakage Current I≤0.2 CV or 500μA（2.5~25V,take the maximum）I≤0.1 CV or 500μA（35~100V,take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                       (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±10% of the initial value
D.F. (tanδ):≤130% of the initial specified value
ESR:≤130% of the initial specified value
Leakage Current :≤The initial specified value

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
63 10 6.3*9 110 299 750

How to order

XM2   100   M    1J   D06L09    T

XM2:Series code

100:Capacitance code

M:Capacitance tolerance code

1J:Voltage code

D06L09:Size code

T:Packing number

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

e-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：xuanxcapacitors.com

 

The post Capacitor 10uf 63v SMD type high ripple vendor appeared first on Xuansn Capacitor.

]]> 极速赛车168 Capacitor 150uf 50v SMD type high ripple supplier https://capacitorsfilm.com/product/capacitor-150uf-50v-smd-type-high-ripple-supplier/ Thu, 17 Nov 2022 09:05:18 +0000 https://capacitorsfilm.com/?post_type=product&p=6553 Type: SMD Operating Temperature:-55℃~+105℃ Life:5000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Capacitor 150uf 50v SMD type high ripple supplier appeared first on Xuansn Capacitor.

]]> The full name of solid capacitor 150uf 50v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XM2 Series-Capacitor 150uf 50v

● Low ESR, High ripple, miniaturized
● SMD type: lead free reflow soldering condition at 260℃ peak correspondence
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification33 150UF50V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08(2.5~6.3V)        tanδ (max.)=0.12(10~100V)                               (at 20°C, 120Hz)
Leakage Current I≤0.2 CV or 500μA（2.5~25V,take the maximum）I≤0.1 CV or 500μA（35~100V,take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                       (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±10% of the initial value
D.F. (tanδ):≤130% of the initial specified value
ESR:≤130% of the initial specified value
Leakage Current :≤The initial specified value

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
50 150 8*12.6 60 750 1550

How to order

XM2   151  M    1H    D08L13   T

XM2:Series code

151:Capacitance code

M:Capacitance tolerance code

1H:Voltage code

D08L13:Size code

T:Packing number

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

e-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：xuanxcapacitors.com

 

The post Capacitor 150uf 50v SMD type high ripple supplier appeared first on Xuansn Capacitor.

]]> 极速赛车168 Capacitor 100uf 50v SMD type high ripple manufacturer https://capacitorsfilm.com/product/capacitor-100uf-50v-smd-type-high-ripple-manufacturer/ Tue, 15 Nov 2022 10:44:39 +0000 https://capacitorsfilm.com/?post_type=product&p=6529 Type: SMD Operating Temperature:-55℃~+105℃ Life:5000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Capacitor 100uf 50v SMD type high ripple manufacturer appeared first on Xuansn Capacitor.

]]> The full name of solid capacitor 100uf 50v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XM2 Series-Capacitor 100uf 50v

● Low ESR, High ripple, miniaturized
● SMD type: lead free reflow soldering condition at 260℃ peak correspondence
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification33 100UF50V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08(2.5~6.3V)        tanδ (max.)=0.12(10~100V)                               (at 20°C, 120Hz)
Leakage Current I≤0.2 CV or 500μA（2.5~25V,take the maximum）I≤0.1 CV or 500μA（35~100V,take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                       (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±10% of the initial value
D.F. (tanδ):≤130% of the initial specified value
ESR:≤130% of the initial specified value
Leakage Current :≤The initial specified value

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
50 100 8*9.8 60 500 1320
50 100 10*12.6 55 500 2100

How to order

XM2   101  M    1H     D08L10   T

XM2   101  M    1H     D08L13   T

XM2   101  M    1H     D10L13   T

XM2:Series code

101:Capacitance code

M:Capacitance tolerance code

1H:Voltage code

D08L10:Size code

T:Packing number

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

e-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：xuanxcapacitors.com

 

The post Capacitor 100uf 50v SMD type high ripple manufacturer appeared first on Xuansn Capacitor.

]]> 极速赛车168 Capacitor 47uf 50v SMD type high ripple manufacturer https://capacitorsfilm.com/product/capacitor-47uf-50v-smd-type-high-ripple-manufacturer/ Tue, 15 Nov 2022 10:40:23 +0000 https://capacitorsfilm.com/?post_type=product&p=6530 Type: SMD Operating Temperature:-55℃~+105℃ Life:5000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Capacitor 47uf 50v SMD type high ripple manufacturer appeared first on Xuansn Capacitor.

]]> The full name of solid capacitor 47uf 50v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XM2 Series-Capacitor 47uf 50v

● Low ESR, High ripple, miniaturized
● SMD type: lead free reflow soldering condition at 260℃ peak correspondence
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification33 47UF50V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08(2.5~6.3V)        tanδ (max.)=0.12(10~100V)                               (at 20°C, 120Hz)
Leakage Current I≤0.2 CV or 500μA（2.5~25V,take the maximum）I≤0.1 CV or 500μA（35~100V,take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                       (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±10% of the initial value
D.F. (tanδ):≤130% of the initial specified value
ESR:≤130% of the initial specified value
Leakage Current :≤The initial specified value

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
50 47 6.3*09 80 299 920
50 47 8*12.6 60 299 1500

How to order

XM2   470  M    1H     D06L09   T

XM2:Series code

470:Capacitance code

M:Capacitance tolerance code

1H:Voltage code

D06L09:Size code

T:Packing number

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

e-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：xuanxcapacitors.com

The post Capacitor 47uf 50v SMD type high ripple manufacturer appeared first on Xuansn Capacitor.

]]> 极速赛车168 Capacitor 33uf 50v SMD type low ESR manufacturer https://capacitorsfilm.com/product/capacitor-33uf-50v-smd-type-low-esr-manufacturer/ Tue, 15 Nov 2022 10:38:56 +0000 https://capacitorsfilm.com/?post_type=product&p=6531 Type: SMD Operating Temperature:-55℃~+105℃ Life:5000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Capacitor 33uf 50v SMD type low ESR manufacturer appeared first on Xuansn Capacitor.

]]> The full name of solid capacitor 33uf 50v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XM2 Series-Capacitor 33uf 50v

● Low ESR, High ripple, miniaturized
● SMD type: lead free reflow soldering condition at 260℃ peak correspondence
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification33 33UF50V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08(2.5~6.3V)        tanδ (max.)=0.12(10~100V)                               (at 20°C, 120Hz)
Leakage Current I≤0.2 CV or 500μA（2.5~25V,take the maximum）I≤0.1 CV or 500μA（35~100V,take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                       (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±10% of the initial value
D.F. (tanδ):≤130% of the initial specified value
ESR:≤130% of the initial specified value
Leakage Current :≤The initial specified value

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
50 33 6.3*09 100 299 550

How to order

XM2   100   M    1H     D06L09   T

XM2:Series code

330:Capacitance code

M:Capacitance tolerance code

1H:Voltage code

D06L09:Size code

T:Packing number

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

e-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：xuanxcapacitors.com

The post Capacitor 33uf 50v SMD type low ESR manufacturer appeared first on Xuansn Capacitor.

]]> 极速赛车168 Capacitor 22uf 50v SMD type low ESR supplier https://capacitorsfilm.com/product/capacitor-22uf-50v-smd-type-low-esr-supplier/ Tue, 15 Nov 2022 10:35:59 +0000 https://capacitorsfilm.com/?post_type=product&p=6532 Type: SMD Operating Temperature:-55℃~+105℃ Life:5000hours Applications:fast charging sources, 5G base stations, PC motherboards,etc. Manufacturer:XUANSN

The post Capacitor 22uf 50v SMD type low ESR supplier appeared first on Xuansn Capacitor.

]]> The full name of solid capacitor 22uf 50v is: solid aluminum electrolytic capacitors. The biggest difference between it and ordinary capacitors (ie, liquid aluminum electrolytic capacitors) is the use of different dielectric materials. The dielectric material of liquid aluminum capacitors is electrolyte, while the dielectric material of solid capacitors is conductive polymer materials.

XM2 Series-Capacitor 22uf 50v

● Low ESR, High ripple, miniaturized
● SMD type: lead free reflow soldering condition at 260℃ peak correspondence
● RoHS Compliant

 Item Characteristics
Temperature Range -55~+105℃
Specification33 22UF50V
Capacitance Tolerance ±20% (M)                                                    (at 20°C, 120Hz)
Dissipation Factor (tanδ) tanδ (max.)=0.08(2.5~6.3V)        tanδ (max.)=0.12(10~100V)                               (at 20°C, 120Hz)
Leakage Current I≤0.2 CV or 500μA（2.5~25V,take the maximum）I≤0.1 CV or 500μA（35~100V,take the maximum）
Where, I: Max.leakage current (μA), C: Nominal capacitance (μF),V:Rated voltage (V),(at 20 °C after 2 minutes)
Low Temperature Characteristics (Max. Impedance Ratio) Z(-25°C)/Z(+20°C)≦1.25
Z(-40°C)/Z(+20°C)≦1.25                       (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated ripple current is applied for 2,000 hours at 105°C.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Damp heat（steady state） The specifications listed below shall be satisfied when the capacitors are restored to 20℃ after application of rated voltage for 1000 hours at 60℃,90%~95%RH.

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Surge Voltage Surge voltage = rated voltage * 1.15 (V)

The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor（Rc=1kΩ）and discharge for 5 minutes 30 seconds

Capacitance Change :≤±20% of the initial value
D.F. (tanδ):≤150% of the initial specified value
ESR:≤150% of the initial specified value
Leakage Current :≤The initial specified value
Resistance to soldering heat Measurement for solder temperature profile shall be made at the capacitor top and the terminal.

Capacitance Change :≤±10% of the initial value
D.F. (tanδ):≤130% of the initial specified value
ESR:≤130% of the initial specified value
Leakage Current :≤The initial specified value

Dimensions

capacitor

Rated Ripple Current Correction Coefficient

Frequency (Hz) 120Hz≦f＜1kHz 1kHz≦f＜10kHz 10kHz≦f＜100kHz 100kHz≦f＜500kHz
Coefficient 0.05 0.30 0.70 1.00

Parameters Table

Rated voltage（V） Rated Capacitance（μf） Case size     D*L(mm)

      ESR(mΩ）

at 20℃ 100kHz

 Leakage Current

(μA)

 Rated ripple current（mArms/105℃/100kHz）
50 22 6.3*09 100 299 850

How to order

XM2   220  M    1H     D06L09   T

XM2:Series code

220:Capacitance code

M:Capacitance tolerance code

1H:Voltage code

D06L09:Size code

T:Packing number

Our advantage

1. Have 18 years experiences in capacitor industry. Be able to quickly understand the needs of customers and give feedback quickly.

2. Covers all capacitors: Electrolytic capacitors, film capacitors, safety capacitors, ceramic capacitors, super capacitors.

3.With 200 production lines, the sample delivery time is 3 days, and the bulk goods delivery time is 2 weeks.

4.The company has its own R&D team and after-sales team, providing complete pre-sale, in-sale and after-sale services.

Contact us

We are a supplier of electrolytic capacitor, and we have rich experiences in this field. Our daily production capacity can reach  7 million electrolytic capacitors, the sample period is 3 days, and the production cycle is 10 days. We will give you great support in terms of price, quality and delivery time.

And Support Customer’s Visit To The Factory

e-mail：  sales1@xuanxcapacitors.com

Pho（whatsapp）：+ 86-18825879082

Skype：Coco.psh

website：xuanxcapacitors.com

The post Capacitor 22uf 50v SMD type low ESR supplier appeared first on Xuansn Capacitor.

]]>