极速赛车168 Mylar capacitor Archives - Xuansn Capacitor https://capacitorsfilm.com/product-tag/mylar-capacitor/ Capacitor Supplier Tue, 14 Sep 2021 10:02:03 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.5 极速赛车168 Polyester film polyester capacitor CL11 1200V102J manufacturer https://capacitorsfilm.com/product/polyester-film-polyester-capacitor-cl11-1200v102j-manufacturer/ Sat, 10 Oct 2020 09:59:57 +0000 https://capacitorsfilm.com/?post_type=product&p=1524 Series: CL11 Error: ±5% (J) Withstand voltage: 2UR (5s) Electric capacity range: 0.001~0.47uf Customized service: capacity, voltage, size, trademark

The post Polyester film polyester capacitor CL11 1200V102J manufacturer appeared first on Xuansn Capacitor.

]]> Polyester film polyester capacitor CL11 1200V102J

Polyester film polyester capacitor CL11 can be used in many ways. If the polyester capacitors are connected in parallel, the capacity can be increased, and if they are connected in series, the capacity can be adjusted.

Polyester film polyester capacitor CL11 1200V102J

ltem Characteristics
Reference standard GB6346 (IEC 60384-11)
Climatic Category 40/85/21
Rated Voltage 1200V
Capacitance 0.001µf
Capacitance Tolerance ±5%(J)
Voltage proof 2UR (5S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance

≥30000MΩ

 20°C，1min

Size of CL11 102J1200V Film Capacitor

Outline DrawingCL11 102J1200V Film Capacitor
W:8.0mm
H: 14.0mm
T:5.5mm
P±1：5.0mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post Polyester film polyester capacitor CL11 1200V102J manufacturer appeared first on Xuansn Capacitor.

]]> 极速赛车168 CL11 film polyester capacitors 2J102J factory high quality https://capacitorsfilm.com/product/cl11-film-polyester-capacitors-2j102j-factory-high-quality/ Sat, 10 Oct 2020 09:56:02 +0000 https://capacitorsfilm.com/?post_type=product&p=1521 Series: CL11 Capacity: 102J Error: ±5% (J) Withstand voltage: 2UR (5s) Customized service: capacity, voltage, size, trademark

The post CL11 film polyester capacitors 2J102J factory high quality appeared first on Xuansn Capacitor.

]]> CL11 film polyester capacitors 2J102J

CL11 film polyester capacitors are mainly used for filtering and isolation. In addition, some electrical appliances use polyester capacitors for coupling and oscillation.

CL11 film polyester capacitors 2J102J

ltem Characteristics
Reference standard GB6346 (IEC 60384-11)
Climatic Category 40/85/21
Rated Voltage 630V
Capacitance 0.001µf
Capacitance Tolerance ±5%(J)
Voltage proof 2UR (5S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance

≥30000MΩ

 20°C，1min

Size of CL11 102J630V Film Capacitor

Outline DrawingCL11 102J630V Film Capacitor
W:7.5mm
H: 12.0mm
T:4.5mm
P±1：4.0mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post CL11 film polyester capacitors 2J102J factory high quality appeared first on Xuansn Capacitor.

]]> 极速赛车168 Factory Outlet CL11 film capacitor polyester dielectric 400V https://capacitorsfilm.com/product/factory-outlet-cl11-film-capacitor-polyester-dielectric-400v/ Sat, 10 Oct 2020 09:52:15 +0000 https://capacitorsfilm.com/?post_type=product&p=1518 Series: CL11 Capacity: 102J Error: ±5% (J) Application: General Special services: bent feet, cut feet

The post Factory Outlet CL11 film capacitor polyester dielectric 400V appeared first on Xuansn Capacitor.

]]> CL11 film capacitor polyester dielectric 400V

When the CL11 film capacitor is used as a bypass, it is mainly used to reduce the impedance of the DC bus and absorb the ripple current from the load, thereby effectively suppressing the fluctuation of the DC bus voltage due to sudden load changes.

CL11 film capacitor polyester dielectric 400V

ltem Characteristics
Reference standard GB6346 (IEC 60384-11)
Climatic Category 40/85/21
Rated Voltage 400V
Capacitance 0.001µf
Capacitance Tolerance ±5%(J)
Voltage proof 2UR (5S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance

≥30000MΩ

 20°C，1min

Size of CL11 102J400V Film Capacitor

Outline DrawingCL11 102J400V Film Capacitor
W:6.0mm
H: 11.5mm
T:4.0mm
P±1：4.0mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post Factory Outlet CL11 film capacitor polyester dielectric 400V appeared first on Xuansn Capacitor.

]]> 极速赛车168 Full range of CL11 polyester capacitors 102J P=3.5MM Made in China https://capacitorsfilm.com/product/full-range-of-cl11-polyester-capacitors-102j-p3-5mm-made-in-china/ Sat, 10 Oct 2020 09:48:02 +0000 https://capacitorsfilm.com/?post_type=product&p=1515 Series: CL11 Voltage: 160V (2C) Error: ±5% (J) Application: General Special services: bent feet, cut feet

The post Full range of CL11 polyester capacitors 102J P=3.5MM Made in China appeared first on Xuansn Capacitor.

]]> Full range of CL11 polyester capacitors 102J P=3.5MM

The full range of CL11 polyester capacitors are generally used in DC or low-frequency circuits. From the appearance, they are mainly composed of two metal plates sandwiched by a layer of dielectric, and voltage is applied between the metal plates. The element can store charge.

Full range of CL11 polyester capacitors 102J P=3.5MM

ltem Characteristics
Reference standard GB6346 (IEC 60384-11)
Climatic Category 40/85/21
Rated Voltage 160V
Capacitance 0.001µf
Capacitance Tolerance ±5%(J)
Voltage proof 2UR (5S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance

≥30000MΩ

 20°C，1min

Size of CL11 102J160V Film Capacitor

Outline DrawingCL11 102J160V Film Capacitor
W:6.5mm
H: 11.0mm
T:3.4mm
P±1：3.5mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post Full range of CL11 polyester capacitors 102J P=3.5MM Made in China appeared first on Xuansn Capacitor.

]]> 极速赛车168 metalized polyester film capacitor CL11 103j63v new product https://capacitorsfilm.com/product/63v-plug-in-green-polyester-film-capacitor-mylar-capacitor-0-001uf-quality-product/ Sat, 10 Oct 2020 09:44:53 +0000 https://capacitorsfilm.com/?post_type=product&p=1512 Series: CL11 Model: 1J102J Application: General Size: 6.0*10.5*2.8*0.5mm Warranty: Unconditional replenishment

The post metalized polyester film capacitor CL11 103j63v new product appeared first on Xuansn Capacitor.

]]> metalized polyester film capacitor CL11 103j63v new product

The metalized polyester film capacitor CL11 has high stability, so it is the most suitable choice for some occasions where stability is strictly required. For example, on electronic instruments or meters and radios, it can be used as a coupling or as a bypass.

metalized polyester film capacitor CL11 103j63v new product

ltem Characteristics
Reference standard GB6346 (IEC 60384-11)
Climatic Category 40/85/21
Rated Voltage 63V
Capacitance 0.001µf
Capacitance Tolerance ±5%(J)
Voltage proof 2UR (5S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance

≥30000MΩ

 20°C，1min

Size of CL11 102J63V Film Capacitor

Outline DrawingCL11 102J63V Film Capacitor
W:6.0mm
H: 10.5mm
T:2.8mm
P±1：3.5mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post metalized polyester film capacitor CL11 103j63v new product appeared first on Xuansn Capacitor.

]]> 极速赛车168 High flame retardant Mylar capacitor CL11 102J factory wholesale https://capacitorsfilm.com/product/high-flame-retardant-mylar-capacitor-cl11-102j-factory-wholesale/ Sat, 10 Oct 2020 09:39:24 +0000 https://capacitorsfilm.com/?post_type=product&p=1509 Series: CL11 Model: 1H102J Voltage: 50V Size: 5.0*7.0*2.5*0.5mm Warranty: Unconditional replenishment

The post High flame retardant Mylar capacitor CL11 102J factory wholesale appeared first on Xuansn Capacitor.

]]> High flame retardant Mylar capacitor CL11 102J

The high flame-retardant Mylar capacitor has strong stability and will not cause capacity reduction after self-healing. It has strong tolerance and can withstand the pressure of large currents.

High flame retardant Mylar capacitor CL11 102J

ltem Characteristics
Reference standard GB6346 (IEC 60384-11)
Climatic Category 40/85/21
Rated Voltage 50V
Capacitance 0.001µf
Capacitance Tolerance ±5%(J)
Voltage proof 2UR (5S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance

≥30000MΩ

 20°C，1min

Size of CL11 102J50V Film Capacitor

Outline DrawingCL11 102J50V Film Capacitor
W:5.0mm
H: 7.0mm
T:2.5mm
P±1：3.5mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post High flame retardant Mylar capacitor CL11 102J factory wholesale appeared first on Xuansn Capacitor.

]]> 极速赛车168 CL11 polyester capacitor 3B222J foil type inductive structure manufacturer https://capacitorsfilm.com/product/cl11-high-voltage-polyester-capacitor-3b222j-foil-type-inductive-structure-manufacturer/ Sat, 10 Oct 2020 09:34:00 +0000 https://capacitorsfilm.com/?post_type=product&p=1506 Type: Polyester film capacitor Capacity: 0.0022uf P:5.0mm Size: 8.0*14.0*5.5*0.5mm Application: General

The post CL11 polyester capacitor 3B222J foil type inductive structure manufacturer appeared first on Xuansn Capacitor.

]]> CL11 polyester capacitor 3B222J foil type inductive structure

CL11 polyester capacitor 3B222J has excellent mechanical properties, electrical properties and optical properties, so the application range is very wide.

CL11 polyester capacitor 3B222J foil type inductive structure

ltem Characteristics
Reference standard GB6346 (IEC 60384-11)
Climatic Category 40/85/21
Rated Voltage 1200V
Capacitance 0.0022µf
Capacitance Tolerance ±5%(J)
Voltage proof 2UR (5S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance

≥30000MΩ

 20°C，1min

Size of CL11 222J1200V Film Capacitor

Outline DrawingCL11 222J1200V Film Capacitor
W:8.0mm
H: 14.0mm
T:5.5mm
P±1：5.0mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post CL11 polyester capacitor 3B222J foil type inductive structure manufacturer appeared first on Xuansn Capacitor.

]]> 极速赛车168 Metallized polyester film capacitor CL11 630V factory customization https://capacitorsfilm.com/product/metallized-polyester-film-capacitor-cl11-630v-factory-customization/ Sat, 10 Oct 2020 09:14:19 +0000 https://capacitorsfilm.com/?post_type=product&p=1503 Type: Polyester film capacitor Capacity: 0.0022uf P: 4.5mm Application: Genera Special services: cut feet, bent feet

The post Metallized polyester film capacitor CL11 630V factory customization appeared first on Xuansn Capacitor.

]]> Metallized polyester film capacitor CL11 630V

Metallized polyester film capacitor CL11 non-inductive winding structure, wide capacity range, small size and light weight. Widely used in filtering and low pulse circuits.

Metallized polyester film capacitor CL11 630V

ltem Characteristics
Reference standard GB6346 (IEC 60384-11)
Climatic Category 40/85/21
Rated Voltage 630V
Capacitance 0.0022µf
Capacitance Tolerance ±5%(J)
Voltage proof 2UR (5S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance

≥30000MΩ

 20°C，1min

Size of CL11 222J630V Film Capacitor

Outline DrawingCL11 222J630V Film Capacitor
W:8.5mm
H: 13.0mm
T:4.5mm
P±1：4.5mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post Metallized polyester film capacitor CL11 630V factory customization appeared first on Xuansn Capacitor.

]]> 极速赛车168 CL11 Mylar capacitor 400V0.0022uf factory Outlet https://capacitorsfilm.com/product/cl11-mylar-capacitor-400v0-0022uf-factory-outlet/ Sat, 10 Oct 2020 09:10:12 +0000 https://capacitorsfilm.com/?post_type=product&p=1500 Type: Polyester film capacitor Tolerance: ±5% Electric capacity range: 0.001~0.47uf Application: General Special services: cut feet, bent feet

The post CL11 Mylar capacitor 400V0.0022uf factory Outlet appeared first on Xuansn Capacitor.

]]> CL11 Mylar capacitor 400V0.0022uf

CL11 Mylar capacitor has the characteristics of good self-healing, long life, and flame retardant epoxy powder encapsulation. It is suitable for DC blocking, bypassing and coupling of DC and VHF level signals.

CL11 Mylar capacitor 400V0.0022uf

ltem Characteristics
Reference standard GB6346 (IEC 60384-11)
Climatic Category 40/85/21
Rated Voltage 400V
Capacitance 0.0022µf
Capacitance Tolerance ±5%(J)
Voltage proof 2UR (5S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance

≥30000MΩ

 20°C，1min

Size of CL11 222J400V Film Capacitor

Outline DrawingCL11 222J400V Film Capacitor
W:6.5mm
H: 12.5mm
T:4.0mm
P±1：4.0mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post CL11 Mylar capacitor 400V0.0022uf factory Outlet appeared first on Xuansn Capacitor.

]]> 极速赛车168 CL11 Mylar capacitor 2C222J supplier https://capacitorsfilm.com/product/2c222j-capacitor-cl11-mylar-capacitor-supplier/ Sat, 10 Oct 2020 09:03:35 +0000 https://capacitorsfilm.com/?post_type=product&p=1497 Type: Polyester film capacitor Tolerance: ±5% Encapsulation: epoxy resin encapsulation Application: General Special services: cut feet, bent feet

The post CL11 Mylar capacitor 2C222J supplier appeared first on Xuansn Capacitor.

]]> CL11 Mylar capacitor 2C222J supplier

The CL11 Mylar capacitor 2c222J uses two pieces of metal foil as electrodes, sandwiched in a very thin insulating medium, and rolled into a cylindrical or flat cylindrical core. The medium is polyester.

CL11 Mylar capacitor 2C222J supplier

ltem Characteristics
Reference standard GB6346 (IEC 60384-11)
Climatic Category 40/85/21
Rated Voltage 160V
Capacitance 0.0022µf
Capacitance Tolerance ±5%(J)
Voltage proof 2UR (5S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance

≥30000MΩ

 20°C，1min

Size of CL11 222J160V Film Capacitor

Outline DrawingCL11 222J160V Film Capacitor
W:6.5mm
H: 11.0mm
T:3.4mm
P±1：3.5mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post CL11 Mylar capacitor 2C222J supplier appeared first on Xuansn Capacitor.

]]>