极速赛车168 Polyester film capacitor Archives - Xuansn Capacitor https://capacitorsfilm.com/product-tag/polyester-film-capacitor/ Capacitor Supplier Fri, 17 Sep 2021 06:25:43 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.5 极速赛车168 Radial lead CL21 capacitor 683J630V good quality products https://capacitorsfilm.com/product/radial-lead-cl21-capacitor-683j630v-good-quality-products/ Tue, 03 Nov 2020 08:24:28 +0000 https://capacitorsfilm.com/?post_type=product&p=1883 Type: Film capacitor Withstand voltage: 1.6UR (2S) Deviation: ±5% (J) ±10% (K) Application: General Structure: fixed capacitor

The post Radial lead CL21 capacitor 683J630V good quality products appeared first on Xuansn Capacitor.

]]> Radial lead CL21 capacitor 683J630V good quality products

Radial lead CL21 capacitor are used in electronic instruments or meters and radios. They can be used as coupling or bypass.

Characteristic of 683J630V Film Capacitor

ltem Characteristics
Reference standard GB7332 (IEC 60384-2)
Climatic Category 40/85/21
Rated Voltage 630V
Capacitance 0.068UF
Capacitance Tolerance ±5%(J)
Voltage proof 1.6UR (2S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance

≥7500MΩ

 20°C，1min

Size of CL21 683J 630V Film Capacitor

CL21 683J 630V Film Capacitor
W: 14.0mm
H: 14.0mm
T: 7.0mm
P±1: 10.0mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post Radial lead CL21 capacitor 683J630V good quality products appeared first on Xuansn Capacitor.

]]> 极速赛车168 CL21 683J 400V capacitor factory direct supply https://capacitorsfilm.com/product/cl21-683j-400v-capacitor-electronic-components-factory-direct-supply/ Tue, 03 Nov 2020 08:18:34 +0000 https://capacitorsfilm.com/?post_type=product&p=1880 Type: Film capacitor Withstand voltage: 1.6UR (2S) Deviation: ±5% (J) ±10% (K) Application: General Structure: fixed capacitor

The post CL21 683J 400V capacitor factory direct supply appeared first on Xuansn Capacitor.

]]> CL21 683J 400V capacitor factory direct supply

CL21 683J 400V capacitor have strong heat resistance and humidity resistance. It also has certain pressure resistance.

Characteristic of 683J400V Film Capacitor

ltem Characteristics
Reference standard GB7332 (IEC 60384-2)
Climatic Category 40/85/21
Rated Voltage 400V
Capacitance 0.068UF
Capacitance Tolerance ±5%(J)
Voltage proof 1.6UR (2S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance

≥7500MΩ

 20°C，1min

Size of CL21 683J 400V Film Capacitor

CL21 683J 400V Film Capacitor
W: 13.5mm
H: 11.0mm
T: 6.0mm
P±1: 10.0mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post CL21 683J 400V capacitor factory direct supply appeared first on Xuansn Capacitor.

]]> 极速赛车168 Metal polyester film capacitors CL21 683J250V factory https://capacitorsfilm.com/product/metal-polyester-film-capacitor-for-dc-blocking-cl21683j250v-factory/ Tue, 03 Nov 2020 08:13:29 +0000 https://capacitorsfilm.com/?post_type=product&p=1877 Type: Film capacitor Withstand voltage: 1.6UR (2S) Deviation: ±5% (J) ±10% (K) Application: General Structure: fixed capacitor

The post Metal polyester film capacitors CL21 683J250V factory appeared first on Xuansn Capacitor.

]]> Metal polyester film capacitors CL21 683J250V factory

Among the metal polyester film capacitors for DC blocking, polyester capacitors achieve the best volumetric efficiency at a moderate cost and are the most popular choice for DC applications such as decoupling, blocking, bypassing, and noise suppression.

Characteristic of 683J250V Film Capacitors

ltem Characteristics
Reference standard GB7332 (IEC 60384-2)
Climatic Category 40/85/21
Rated Voltage 250V
Capacitance 0.068UF
Capacitance Tolerance ±5%(J)
Voltage proof 1.6UR (2S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance

≥7500MΩ

 20°C，1min

Size of CL21 683J 250V Film Capacitor

CL21 683J 250V Film Capacitor
W: 13.5mm
H: 10.5mm
T: 5.5mm
P±1: 10.0mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post Metal polyester film capacitors CL21 683J250V factory appeared first on Xuansn Capacitor.

]]> 极速赛车168 Metal film capacitor CL21 683J100V manufacturers https://capacitorsfilm.com/product/small-metal-film-capacitor-cl21-683j100v-manufacturers/ Tue, 03 Nov 2020 08:07:57 +0000 https://capacitorsfilm.com/?post_type=product&p=1874 Type: Film capacitor Withstand voltage: 1.6UR (2S) Deviation: ±5% (J) ±10% (K) Application: General Structure: fixed capacitor

The post Metal film capacitor CL21 683J100V manufacturers appeared first on Xuansn Capacitor.

]]> Metal film capacitor CL21 683J100V manufacturers

The Metal film capacitor CL21 683J100V shows good characteristics in common applications, with high dielectric constant, high insulation strength, self-healing characteristics and good temperature stability.

Characteristic of 683J100V Film Capacitor

ltem Characteristics
Reference standard GB7332 (IEC 60384-2)
Climatic Category 40/85/21
Rated Voltage 100V
Capacitance 0.068UF
Capacitance Tolerance ±5%(J)
Voltage proof 1.6UR (2S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance

≥7500MΩ

 20°C，1min

Size of CL21 683J 100V Film Capacitor

CL21 683J 100V Film Capacitor
W: 13.5mm
H: 10.5mm
T: 5.5mm
P±1: 10.0mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post Metal film capacitor CL21 683J100V manufacturers appeared first on Xuansn Capacitor.

]]> 极速赛车168 Factory direct sales film capacitor CL21 563J630V self-healing https://capacitorsfilm.com/product/factory-direct-sales-film-capacitor-cl21-563j630v-self-healing/ Tue, 03 Nov 2020 07:45:46 +0000 https://capacitorsfilm.com/?post_type=product&p=1871 Type: Film capacitor Withstand voltage: 1.6UR (2S) Deviation: ±5% (J) ±10% (K) Application: General Structure: fixed capacitor

The post Factory direct sales film capacitor CL21 563J630V self-healing appeared first on Xuansn Capacitor.

]]> Factory direct sales film capacitor CL21 563J630V self-healing

Factory direct sales film capacitor CL21 metallized polyester container has self-healing characteristics, that is, if there is a defect in the plastic film of the capacitor, it will break down when voltage is applied, and the metal film here will evaporate without short circuit. Make the capacitor still work normally.

Characteristic of 563J630V Film Capacitor

ltem Characteristics
Reference standard GB7332 (IEC 60384-2)
Climatic Category 40/85/21
Rated Voltage 630V
Capacitance 0.056UF
Capacitance Tolerance ±5%(J)
Voltage proof 1.6UR (2S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance

≥7500MΩ

 20°C，1min

Size of CL21 563J 630V Film Capacitor

CL21 563J 630V Film Capacitor
W: 14.0mm
H: 13.5mm
T: 6.5mm
P±1: 10.0mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post Factory direct sales film capacitor CL21 563J630V self-healing appeared first on Xuansn Capacitor.

]]> 极速赛车168 CL21 fixed capacitor 250V polyester film capacitor for sale https://capacitorsfilm.com/product/cl21-fixed-capacitor-250v-polyester-film-capacitor-for-sale/ Tue, 03 Nov 2020 07:40:38 +0000 https://capacitorsfilm.com/?post_type=product&p=1868 Type: Film capacitor Withstand voltage: 1.6UR (2S) Deviation: ±5% (J) ±10% (K) Capacity: 563J Structure: fixed capacitor

The post CL21 fixed capacitor 250V polyester film capacitor for sale appeared first on Xuansn Capacitor.

]]> CL21 fixed capacitor 250V polyester film capacitor for sale

CL21 Fixed Capacitors 250V polyester film capacitor with small capacity can be produced with series metallized film, with high pressure resistance, high temperature wax internal sealing, flame retardant epoxy powder encapsulation, stable moisture resistance and low noise.

Characteristic of 563J250V Film Capacitor

ltem Characteristics
Reference standard GB7332 (IEC 60384-2)
Climatic Category 40/85/21
Rated Voltage 250V
Capacitance 0.056UF
Capacitance Tolerance ±5%(J)
Voltage proof 1.6UR (2S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance

≥7500MΩ

 20°C，1min

Size of CL21 563J 250V Film Capacitor

CL21 563J 250V Film Capacitor
W: 13.5mm
H: 10.0mm
T: 5.0mm
P±1: 10.0mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post CL21 fixed capacitor 250V polyester film capacitor for sale appeared first on Xuansn Capacitor.

]]> 极速赛车168 400V CL21 metallized film capacitor 563J suppliers https://capacitorsfilm.com/product/400v-cl21-capacitor-metalized-film-capacitor-563j-suppliers/ Tue, 03 Nov 2020 07:35:12 +0000 https://capacitorsfilm.com/?post_type=product&p=1865 Type: Film capacitor Withstand voltage: 1.6UR (2S) Deviation: ±5% (J) ±10% (K) Application: General Structure: fixed capacitor

The post 400V CL21 metallized film capacitor 563J suppliers appeared first on Xuansn Capacitor.

]]> 400V CL21 metallized film capacitor 563J suppliers

The 400V CL21 metallized film capacitor has a wide range, small size, high temperature resistance (up to 120°C), light weight, relatively low price, and good self-healing.

Characteristic of 563J400V Film Capacitor

ltem Characteristics
Reference standard GB7332 (IEC 60384-2)
Climatic Category 40/85/21
Rated Voltage 400V
Capacitance 0.056UF
Capacitance Tolerance ±5%(J)
Voltage proof 1.6UR (2S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance

≥7500MΩ

 20°C，1min

Size of CL21 563J 400V Film Capacitor

CL21 563J 400V Film Capacitor
W: 13.5mm
H: 11.0mm
T: 5.5mm
P±1: 10.0mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post 400V CL21 metallized film capacitor 563J suppliers appeared first on Xuansn Capacitor.

]]> 极速赛车168 CL21 polyester film capacitor 563J100V wholesale for sale https://capacitorsfilm.com/product/p10mm-cl21-polyester-film-capacitor-563j100v-wholesale-for-sale/ Tue, 03 Nov 2020 07:29:40 +0000 https://capacitorsfilm.com/?post_type=product&p=1862 Type: Film capacitor Withstand voltage: 1.6UR (2S) Deviation: ±5% (J) ±10% (K) Application: General Structure: fixed capacitor

The post CL21 polyester film capacitor 563J100V wholesale for sale appeared first on Xuansn Capacitor.

]]> CL21 polyester film capacitor 563J100V wholesale for sale

p=10mm CL21 polyester film capacitor 563J100V has a large dielectric constant, high insulation resistance, good heat resistance, and good tensile performance. It is suitable for making metalized polyester film capacitors.

Characteristic of 563J100V Film Capacitor

ltem Characteristics
Reference standard GB7332 (IEC 60384-2)
Climatic Category 40/85/21
Rated Voltage 100V
Capacitance 0.056UF
Capacitance Tolerance ±5%(J)
Voltage proof 1.6UR (2S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance

≥7500MΩ

 20°C，1min

Size of CL21 563J 100V Film Capacitor

CL21 563J 100V Film Capacitor
W: 13.5mm
H: 10.0mm
T: 5.0mm
P±1: 10.0mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post CL21 polyester film capacitor 563J100V wholesale for sale appeared first on Xuansn Capacitor.

]]> 极速赛车168 CL21 film capacitor 630V 473J epoxy resin encapsulation factory direct sales https://capacitorsfilm.com/product/cl21-capacitor-film-630v-473j-epoxy-resin-encapsulation-factory-direct-sales/ Tue, 03 Nov 2020 07:24:40 +0000 https://capacitorsfilm.com/?post_type=product&p=1859 Type: Film capacitor Deviation: ±5% (J) ±10% (K) Size (W*H*T*D): 14.0*13.0*6.0*0.6mm P: 10.0mm Special services: cut feet, bent feet

The post CL21 film capacitor 630V 473J epoxy resin encapsulation factory direct sales appeared first on Xuansn Capacitor.

]]> CL21 film capacitor 630V 473J epoxy resin encapsulation factory direct sales

The medium used for CL21 film capacitor  630V 473j is polyester film, and the electrode is a metal vacuum evaporation layer. At the same time, a flame-retardant epoxy resin package is used to ensure the guarantee of its transportation quality.

Characteristic of 473J630V Film Capacitor

ltem Characteristics
Reference standard GB7332 (IEC 60384-2)
Climatic Category 40/85/21
Rated Voltage 630V
Capacitance 0.047UF
Capacitance Tolerance ±5%(J)
Voltage proof 1.6UR (2S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance

≥7500MΩ

 20°C，1min

Size of CL21 473J 630V Film Capacitor

CL21 473J 630V Film Capacitor
W: 14.0mm
H: 13.0mm
T: 6.0mm
P±1: 10.0mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post CL21 film capacitor 630V 473J epoxy resin encapsulation factory direct sales appeared first on Xuansn Capacitor.

]]> 极速赛车168 CL21 capacitor 473J400V film capacitor suppliers https://capacitorsfilm.com/product/non-inductive-structure-cl21-capacitor-473j400v-film-capacitor-suppliers/ Tue, 03 Nov 2020 07:19:55 +0000 https://capacitorsfilm.com/?post_type=product&p=1856 Type: Film capacitor Withstand voltage: 1.6UR (2S) Deviation: ±5% (J) ±10% (K) color: red Warranty: Unconditional replenishment

The post CL21 capacitor 473J400V film capacitor suppliers appeared first on Xuansn Capacitor.

]]> Non-inductive structure CL21 capacitor 473J400V film capacitor suppliers

The non-inductive structure CL21 capacitor 473J400V has a wide range of capacitance, small size, light weight, good self-healing, good temperature resistance, and long life.

Characteristic of 473J400V Film Capacitor

ltem Characteristics
Reference standard GB7332 (IEC 60384-2)
Climatic Category 40/85/21
Rated Voltage 400V
Capacitance 0.047UF
Capacitance Tolerance ±5%(J)
Voltage proof 1.6UR (2S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance

≥7500MΩ

 20°C，1min

Size of CL21 473J 400V Film Capacitor

CL21 473J 400V Film Capacitor
W: 13.5mm
H: 10.5mm
T: 5.5mm
P±1: 10.0mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

The post CL21 capacitor 473J400V film capacitor suppliers appeared first on Xuansn Capacitor.

]]>